|
|
window and wall exhaust fans
Poor ventilation continues to be a major problem in many areas within the home and the workplace. Not only is this unhygienic but it can also be damaging to walls, ceilings and furnishings.
At last a solution!
The revolutionary MaxAir Exhaust Fans by Airflow are a new wave in high performance air extraction products. MaxAir can outperform other exhaust fans by up to three times! Furthermore they have been designed and manufactured right here in Australia.
Attractively styled with silent operating shutters*, they come in a white gloss finish and are very easy to clean. The MaxAir range can be easily retrofitted into many existing cut-out holes and installation can be easily carried out by one person - a great time saving feature!
Suggested applications
Features
- High performance air movement
- Low noise level
- 150mm & 200mm models
- One person installation
(window models)
- Pull-cord and auto shuttered models *
- Can replace many existing fan models
- IPX4 rating
* shutter operation
Auto switch models have approximately 60 seconds delay on opening and up to 3 minutes delay on closing of shutters, ensuring silent operation.
Patented window seal system provides the easiest one person installation, prevents water entry and eliminates window vibration. These fans are designed to fit windows from 4 to 32mm and are configured to allow a flex and plug to be fitted, or they can be wired direct.
Single person assembly is ideal for multi-storey buildings as no second person on an extension ladder outside is required.
Easy fit window installation
|
MaxAir Wall Fans are the easiest to install and are supplied with unique ductwork that will easily fit walls between 110 and 310mm.
No cable ties or tape is needed, as the duct attaches easily to the fan’s unique ‘duct grippers’. Both fans are configured to allow a flex and plug to be fitted or they can be wired direct.
Easy fit wall installation
MaxAir technical information
Fan Type - Axial
Catalogue numbers |
150mm Window
7005A & 7007A |
200mm Window
7105A & 7107A |
| Cubic metres per hour |
360m3/hr |
600m3/hr |
| Litres per second |
100 l/s |
167 l/s |
| Overall intake size (A) |
245 x 245mm |
271 x 271mm |
| Window/Wall depth (B)* |
4-32mm |
4-32mm |
| External protrusion (C) |
95mm |
95mm |
| Room protrusion (D) |
95mm |
105mm |
| Duct diameter size (E) |
172mmø |
210mmø |
| Hole size diameter or sq. |
213mmø |
230mmø |
| Shutter operation |
7005A -Automatic
7007A -Pull-cord |
7105A -Automatic
7107A -Pull-cord |
| Fan diameter |
148mmø |
188mmø |
| Number of speeds |
1 |
1 |
| Rated voltage |
230-240V |
230-240V |
| Watts |
45W |
38W |
| Full load current |
0.27A |
0.18A |
| Motor type |
Sleeve bearing |
Ball-bearing |
| Decibel level at 3 metres |
49dBA |
50dBA |
Fan Type - Axial
Catalogue numbers |
150mm Wall
7006A & 7008A |
200mm Wall
7106A & 7108A |
| Cubic metres per hour |
360m3/hr |
600m3/hr
|
| Litres per second |
100 l/s |
167 l/s |
| Overall intake size (A) |
245 x 245mm |
271 x 271mm |
| Window/Wall depth (B)* |
110 - 310mm |
110 - 310mm |
| External protrusion (C) |
20mm |
20mm |
| Room protrusion (D) |
83mm |
93mm |
| Duct diameter size (E) |
172mmø |
220mmø |
| Hole size diameter or sq. |
180mmø or |
230mmø |
| Shutter operation |
7006A -Automatic
7008A -Pull-cord |
7106A -Automatic
7108A -Pull-cord |
| Fan diameter |
148mmø |
188mmø |
| Number of speeds |
1 |
1 |
| Rated voltage |
230-240V |
230-240V |
| Watts |
45W |
38W |
| Full load current |
0.27A |
0.18A |
| Motor type |
Sleeve bearing |
Ball-bearing |
| Decibel level at 3 metres |
49dBA |
50dBA |
| |
|